PRODUCTS
Vector Aeration Aerobic Fermentation Reactor Device
The vector aeration aerobic fermentation reactor is a sealed integrated reactor with a high degree of intensification;
Fully enclosed, energy-saving, efficient, pollution-free, flexible operation and low operating cost;
It integrates feeding device, discharging device, deodorizing device and fermentation device;
Using a manufacturer does not require the construction of a factory building, and one piece of equipment is equivalent to an intensive chemical factory;
Equipped with a complete set of fermentation exhaust gas treatment devices, the exhaust gas produced complies with the GB14554 national standard.
Learn More
Slide Silo and Square Cone Bottom Silo
The main body of the silo is a square or cone-shaped closed steel structure. The storage silo is composed of a silo body, an entrance grille/feed port, a hydraulic slide/vibration motor, a material level meter, a deodorizing air outlet/dust removal port, etc. The steel Structural parts (supporting access platforms, handrails, stairs, all connecting accessories, anchor bolts) and other accessories.
The steel plate thickness, inner wall anti-corrosion and wear resistance used in the silo comply with national standards, and all welds are inspected in accordance with the Class B regulations of GBll345.
Learn More
Drum Cooling Crystallization Slicer
In a cooling forming process, the molten liquid of the low melting point materials in the material tray contacts the surface of the cooling roller, forming a layer of material film on the surface of the roller. The inner part of the roler uses spray to strengthen cooling and heat transfer and reduce the materia temperature. The material film is cooled and solidified, and the formed material film is scraped off to become a sheet product.
This equipment is suitable for one-step forming of cooling flakes of low melting point materials.
Learn More
Explosive Chemical Cooling and Production
The reaction synthesis section in the chemical production process generates a large amount of high-temperature powder materials, which poses great difficulties in storage, packaging, and transportation. Therefore, it is necessary to cool them to room temperature or a lower safe temperature.
For example, cooling emulsion explosives, NaOH, Na₂CO₃, NaHCO₃, etc.
Learn More
The spiral heat exchanger has a double flow channel composed of two concentric spiral lines. The double flow channels do not interfere with each other, and the medium is in a completely counter-flow state in the flow channel. Thermal fluid generally enters from the central axis, flows from the inside to the outside, and flows out from the sides. The cold fluid enters from the outside of the side and flows inward toward the central axis to achieve counterflow. This method can achieve higher heat transfer coefficients than other types of heat exchangers. Easier to achieve temperature exchange.
Learn More
Tungsten Carbide Spraying Technology
The introduction of the US Plexi Tungsten Carbide Supersonic Spraying Device for spraying the outer surface of the dryer blade and the inner surface of the shell.
Firstly, melt the surface of the metal using high-pressure liquid oxygen, aviation kerosene, propylene oxide and other high-temperature media.
Then, nitrogen subsonic spraying of tungsten carbide onto the molten metal surface is used to achieve secondary fusion of the metal surface.
This technology not only improves the wear resistance of the metal surface, but also extends the service life of the dryer by more than 15 years.
Learn More
Buried Scraper Conveyor Device
The buried scraper conveyor device is divided into two types: Z-type scraper conveyor and horizontal scraper conveyor.
Designed and manufactured based on the complete mapping of the scraper imported by the Japanese company Tsubaki, it uses two guide chains installed inside a closed shell to transport objects horizontally or vertically.
It can transport not only ordinary powders, sludge and granular bodies, but also objects that are not easy to transport and objects with strong adhesion.
Materials used: SUS304 stainless steel shell and scraper, 2Cr13 high-strength chain, HRC=45±5.
Learn More
Act as an agent to purchase the instruments and meters needed at the project site, such as electric valves, pneumatic valves, temperature sensors, thermometers, pressure sensors, pH meters, smart water meters for sewage treatment plants, oxygen concentration detectors, H2S meters, ammonia nitrogen meters, COD meters , gas detector, etc.
Learn More
Experts and Pioneers of Sludge Drying And Pyrolysis Field in China.
Contact
Location：1-208, Industrial Building, No. 555 North Panyu Avenue, Panyu District, Guangzhou, China